Custom Search

News World

Feb 14, 2009

Asterisk - Sample Configuration files for a J1 implementation

Configuring your Sangoma A10x card for J1 is qute simple but it does require making some manul changes:

  1. First use the "wancfg_zaptel" script to quickly create a base wanpipeX.conf, zaptel.conf, and zapata.conf files. For now select the T1 line media and take the default line configuration options (B8ZS and ESF). Select the type of clocking to use; NORMAL, and the card will take the clocking from the line (select this for a telco connection) and MASTER if the card needs to act like the telco and generate the clocking for the line. Next select either PRI_NET (telco/master side of a PRI connection) or PRI_CPE (slave side of a PRI connection). Lastly direct the call to the Asterisk context of your choice.
  2. Once the configuration script has created all the files, the wanpipeX.conf files need to be modified so the driver correctly encodes the line. Open the file "/etc/wanpipe/wanpipeX.conf", where X is the port number. Add the line "FE_SUBMEDIA=J1" as per the following sample wanpipeX.conf file:

    #================================================
    #WANPIPE1 Configuration File
    #================================================
    #
    # Date: Wed Dec 6 20:29:03 UTC 2006
    #
    # Note: This file was generated automatically
    # by /usr/local/sbin/setup-sangoma program.
    #
    # If you want to edit this file, it is
    # recommended that you use wancfg program
    # to do so.
    #================================================
    # Sangoma Technologies Inc.
    #================================================

    [devices]
    wanpipe1 = WAN_AFT_TE1, Comment

    [interfaces]
    w1g1 = wanpipe1, , TDM_VOICE, Comment

    [wanpipe1]
    CARD_TYPE = AFT
    S514CPU = A
    CommPort = PRI
    AUTO_PCISLOT = YES
    PCISLOT = 2
    PCIBUS = 7
    FE_MEDIA = T1
    FE_SUBMEDIA = J1
    FE_LCODE = B8ZS
    FE_FRAME = ESF
    FE_LINE = 1
    TE_CLOCK = NORMAL
    TE_REF_CLOCK = 0

    TE_HIGHIMPEDANCE = NO
    LBO = 0DB
    FE_TXTRISTATE = NO
    MTU = 1500
    UDPPORT = 9000
    TTL = 255
    IGNORE_FRONT_END = NO
    TDMV_SPAN = 1
    TDMV_DCHAN = 24
    TDMV_HW_DTMF = NO

    [w1g1]
    ACTIVE_CH = ALL
    TDMV_ECHO_OFF = NO
    TDMV_HWEC = YES
  3. Save the file and confirm that Wanpipe, Zaptel, and Asterisk start properly. If you have any problems please following the debugging instructions at the following link: PRI Debugging

Sample Zaptel.conf File:

# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit
# Zaptel Channels Configurations (zaptel.conf)
#
loadzone=us
defaultzone=us

#Sangoma A102 port 1 [slot:2 bus:7 span:1]
span=1,0,0,esf,b8zs
bchan=1-23
hardhdlc=24

Sample Zapata.conf file:

;autogenerated by /usr/local/sbin/config-zaptel do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1

immediate=no

;Sangoma A102 port 1 [slot:2 bus:7 span:1]
switchtype=national
context=from-pstn
group=0
signalling=pri_cpe
channel =>1-23

No comments:

IT Conversations

Moneycontrol Latest News

Latest new pages on Computer Hope

Latest from Infoworld

Door Lock

Door Lock Import Top Door Lock from China Contact Quality Manufacturers Now